 |
The
attachment surface must be able to bear the load in question,
and it must be clean, dry and free of grease and solvents. Wipe
it thoroughly with a clean, dry cloth. Do not use a bathroom
cleanser. Solvents can generally be removed with alcohol (allow
to dry). When working with waxed natural stone, use a cleaning
agent that dissolves wax. |
| |
|
 |
Remove the protective
film, position nie wieder bohren adapter and apply firm pressure
for several seconds.
|
| |
|
 |
CAUTION! When using
an adapter with two interior threads, check first whether the
object to be mounted requires horizontal or vertical threading.
|
| |
|
 |
Using the key, puncture
the tip of the tube. Open the tube by one fold, insert it into
the key and unroll it by one more fold.
|
| |
|
 |
Insert the tip of
tube firmly into one of the holes, leaving no gap. Unroll the
end of the tube and feed in adhesive until you see it emerge
from the other opening.
CAUTION! To prevent formation of cavities between the wall and
the adapter, do not apply any more pressure to the adapter. |
| |
|
 |
Allow to harden
for at least 12 hours. Then remove excess adhesive with a fingernail
or razor blade.
|
| |
|
 |
Mount the object.
Done!
|
| |
|
